Hellmutts http://hellmutts.com 2011 Wed, 14 Dec 2011 18:22:55 +0000 en hourly 1 http://wordpress.org/?v=3.2.1 RX-Q Diamond http://hellmutts.com/arai/rx-q-diamond/ http://hellmutts.com/arai/rx-q-diamond/#comments Fri, 25 Nov 2011 22:47:47 +0000 hellmutts_site http://hellmutts.com/?p=622 Arai RX-Q Diamond Solids Helmet
  • Completely new street helmet based on RX7
  • Intermediate oval fit
  • New wider eyeport, same as Corsair V
  • Advanced ventilation
  • Smaller, more aerodynamic shell shape
  • Hyper-ridge circles lower shell to improve strength and aerodynamics
  • Retractable chin spoiler
  • Has emergency cheek pad removal system along with removable neck roll
  • One piece bottom edge trim
  • Meets or exceeds Snell and D.O.T. standards

Click to view Sizing Chart

 

Arai Sizing Chart
3X Small 49-50cm Large 59-60cm
2X Small 51-52cm X Large 61-62cm
X Small 53-54cm 2X Large 63-64cm
Small 55-56cm 3X Large 65-66cm
Medium 57-58cm

Interior Comfort Lining Thickness
Helmet Size Lining Code 12mm Thickness 10mm Thickness 7mm Thickness 5mm Thickness
3XS* I Opt. Std. Opt. Opt.
2XS* I Opt. Opt. Std. Opt.
XS II (sm) Opt. Std. Opt. Opt.
SM II(sm) Opt. Opt. Std. Opt.
MD III(md) Opt. Std. Opt. Opt.
LG III(md) Opt. Opt. Std. Opt.
XL IV(lg) Opt. Opt. Std. Opt.
2XL IV(lg) Opt. Opt. Opt. Std.
3XL V Std.
Removable/replaceable comfort liners, along with check pads, that allow you to customize the fit of Arai helmets.*Not available for all models of helmets.

Interior Cheek Pad Thickness*
Helmet Cheek pads
Size Corsair V Series RX-Q Series Vector-2 Series Profile Series VX-Pro 3 XC/XC Ram XD/XD3
Optional 40mm — — — — — —
Optional 40mm — — 40mm 35mm — 35mm
3XS — — — — — — —
2XS — 35mm 35mm — — — —
XS Std 35mm 30mm 30mm 35mm 30mm 30mm 30mm
SM Std 30mm 30mm 30mm 30mm 25mm 30mm 25mm
Md Std 30mm 30mm 30mm 30mm 25mm 30mm 25mm
Lg Std 25mm 25mm 25mm 25mm 20mm 25mm 20mm
XL Std 25mm 25mm 25mm 25mm 20mm 25mm 20mm
2XL Std 20mm 25mm 25mm 20mm 15mm 25mm 15mm
3XL Std — 20mm 20mm — — — —
Optional 15mm — — 15mm 12mm — 12mm
Optional 12mm — — 12mm — — —
Shell I/O — — L/O — — —
*Current size applications for non Snell 2010. However, note that changes and updates can affect the standard pad-thickness supplied with your helmet.

 

 

]]> http://hellmutts.com/arai/rx-q-diamond/feed/ 0 Corsair V Haslam WSBK http://hellmutts.com/arai/corsair-v-haslam-wsbk/ http://hellmutts.com/arai/corsair-v-haslam-wsbk/#comments Fri, 25 Nov 2011 22:24:43 +0000 hellmutts_site http://hellmutts.com/?p=617 Arai Corsair V Haslam WSBK Graphics Helmet
  • Hyper-Ridge around the bottom enhances shell strength while providing a larger bottom opening
  • Larger bottom opening promotes ease of putting on and taking off the helmet
  • Peripheral belting across the forehead area of the shell enhances structural integrity while maintaining flexibility, low weight and shell size
  • Larger upper vent tabs make operating the vents easier even with thick winter gloves
  • Arai “I” shield with Super AdSis shield system
  • “I” shield is 5mm longer on each side and provides wider field of view
  • “I” shield and base plates exclusive to Corsair V
  • Latest generation of Dry Cool liner has a new silver-grey color
  • Rear mounting snaps are slightly re-positioned for exclusivity to the Corsair V
  • Neckroll is removable and has additional exhaust channels to remove interior heat
  • Cheek pads have the exclusive Emergency Release Tab feature
  • Side exhaust cowls exhaust heat as well as add lateral stability at speed
  • Enhanced air inlets of the new DF-9 diffuser increase airflow efficiency
  • Brow vents now duct air into the temple area and out the side vents for maximum cooling
  • Exclusive Airwing provides unprecedented aerodynamic performance with 5 distinct positions

Click to view Sizing Chart

 

Arai Sizing Chart
3X Small 49-50cm Large 59-60cm
2X Small 51-52cm X Large 61-62cm
X Small 53-54cm 2X Large 63-64cm
Small 55-56cm 3X Large 65-66cm
Medium 57-58cm

Interior Comfort Lining Thickness
Helmet Size Lining Code 12mm Thickness 10mm Thickness 7mm Thickness 5mm Thickness
3XS* I Opt. Std. Opt. Opt.
2XS* I Opt. Opt. Std. Opt.
XS II (sm) Opt. Std. Opt. Opt.
SM II(sm) Opt. Opt. Std. Opt.
MD III(md) Opt. Std. Opt. Opt.
LG III(md) Opt. Opt. Std. Opt.
XL IV(lg) Opt. Opt. Std. Opt.
2XL IV(lg) Opt. Opt. Opt. Std.
3XL V Std.
Removable/replaceable comfort liners, along with check pads, that allow you to customize the fit of Arai helmets.*Not available for all models of helmets.

Interior Cheek Pad Thickness*
Helmet Cheek pads
Size Corsair V Series RX-Q Series Vector-2 Series Profile Series VX-Pro 3 XC/XC Ram XD/XD3
Optional 40mm — — — — — —
Optional 40mm — — 40mm 35mm — 35mm
3XS — — — — — — —
2XS — 35mm 35mm — — — —
XS Std 35mm 30mm 30mm 35mm 30mm 30mm 30mm
SM Std 30mm 30mm 30mm 30mm 25mm 30mm 25mm
Md Std 30mm 30mm 30mm 30mm 25mm 30mm 25mm
Lg Std 25mm 25mm 25mm 25mm 20mm 25mm 20mm
XL Std 25mm 25mm 25mm 25mm 20mm 25mm 20mm
2XL Std 20mm 25mm 25mm 20mm 15mm 25mm 15mm
3XL Std — 20mm 20mm — — — —
Optional 15mm — — 15mm 12mm — 12mm
Optional 12mm — — 12mm — — —
Shell I/O — — L/O — — —
*Current size applications for non Snell 2010. However, note that changes and updates can affect the standard pad-thickness supplied with your helmet.

 

 

]]> http://hellmutts.com/arai/corsair-v-haslam-wsbk/feed/ 0 Corsair V Crutchlow http://hellmutts.com/arai/corsair-v-crutchlow/ http://hellmutts.com/arai/corsair-v-crutchlow/#comments Fri, 25 Nov 2011 22:20:38 +0000 hellmutts_site http://hellmutts.com/?p=614 Arai Corsair V Crutchlow Graphics Helmet
  • Hyper-Ridge around the bottom enhances shell strength while providing a larger bottom opening
  • Larger bottom opening promotes ease of putting on and taking off the helmet
  • Peripheral belting across the forehead area of the shell enhances structural integrity while maintaining flexibility, low weight and shell size
  • Larger upper vent tabs make operating the vents easier even with thick winter gloves
  • Arai “I” shield with Super AdSis shield system
  • “I” shield is 5mm longer on each side and provides wider field of view
  • “I” shield and base plates exclusive to Corsair V
  • Latest generation of Dry Cool liner has a new silver-grey color
  • Rear mounting snaps are slightly re-positioned for exclusivity to the Corsair V
  • Neckroll is removable and has additional exhaust channels to remove interior heat
  • Cheek pads have the exclusive Emergency Release Tab feature
  • Side exhaust cowls exhaust heat as well as add lateral stability at speed
  • Enhanced air inlets of the new DF-9 diffuser increase airflow efficiency
  • Brow vents now duct air into the temple area and out the side vents for maximum cooling
  • Exclusive Airwing provides unprecedented aerodynamic performance with 5 distinct positions

Click to view Sizing Chart

 

Arai Sizing Chart
3X Small 49-50cm Large 59-60cm
2X Small 51-52cm X Large 61-62cm
X Small 53-54cm 2X Large 63-64cm
Small 55-56cm 3X Large 65-66cm
Medium 57-58cm

Interior Comfort Lining Thickness
Helmet Size Lining Code 12mm Thickness 10mm Thickness 7mm Thickness 5mm Thickness
3XS* I Opt. Std. Opt. Opt.
2XS* I Opt. Opt. Std. Opt.
XS II (sm) Opt. Std. Opt. Opt.
SM II(sm) Opt. Opt. Std. Opt.
MD III(md) Opt. Std. Opt. Opt.
LG III(md) Opt. Opt. Std. Opt.
XL IV(lg) Opt. Opt. Std. Opt.
2XL IV(lg) Opt. Opt. Opt. Std.
3XL V Std.
Removable/replaceable comfort liners, along with check pads, that allow you to customize the fit of Arai helmets.*Not available for all models of helmets.

Interior Cheek Pad Thickness*
Helmet Cheek pads
Size Corsair V Series RX-Q Series Vector-2 Series Profile Series VX-Pro 3 XC/XC Ram XD/XD3
Optional 40mm — — — — — —
Optional 40mm — — 40mm 35mm — 35mm
3XS — — — — — — —
2XS — 35mm 35mm — — — —
XS Std 35mm 30mm 30mm 35mm 30mm 30mm 30mm
SM Std 30mm 30mm 30mm 30mm 25mm 30mm 25mm
Md Std 30mm 30mm 30mm 30mm 25mm 30mm 25mm
Lg Std 25mm 25mm 25mm 25mm 20mm 25mm 20mm
XL Std 25mm 25mm 25mm 25mm 20mm 25mm 20mm
2XL Std 20mm 25mm 25mm 20mm 15mm 25mm 15mm
3XL Std — 20mm 20mm — — — —
Optional 15mm — — 15mm 12mm — 12mm
Optional 12mm — — 12mm — — —
Shell I/O — — L/O — — —
*Current size applications for non Snell 2010. However, note that changes and updates can affect the standard pad-thickness supplied with your helmet.

 

 

]]> http://hellmutts.com/arai/corsair-v-crutchlow/feed/ 0 Corsair V Haga WSBK Rainbow http://hellmutts.com/arai/corsair-v-haga-wsbk-rainbow/ http://hellmutts.com/arai/corsair-v-haga-wsbk-rainbow/#comments Fri, 25 Nov 2011 22:15:01 +0000 hellmutts_site http://hellmutts.com/?p=610 Arai Corsair V Haga WSBK Rainbow Graphics Helmet
  • Hyper-Ridge around the bottom enhances shell strength while providing a larger bottom opening
  • Larger bottom opening promotes ease of putting on and taking off the helmet
  • Peripheral belting across the forehead area of the shell enhances structural integrity while maintaining flexibility, low weight and shell size
  • Larger upper vent tabs make operating the vents easier even with thick winter gloves
  • Arai “I” shield with Super AdSis shield system
  • “I” shield is 5mm longer on each side and provides wider field of view
  • “I” shield and base plates exclusive to Corsair V
  • Latest generation of Dry Cool liner has a new silver-grey color
  • Rear mounting snaps are slightly re-positioned for exclusivity to the Corsair V
  • Neckroll is removable and has additional exhaust channels to remove interior heat
  • Cheek pads have the exclusive Emergency Release Tab feature
  • Side exhaust cowls exhaust heat as well as add lateral stability at speed
  • Enhanced air inlets of the new DF-9 diffuser increase airflow efficiency
  • Brow vents now duct air into the temple area and out the side vents for maximum cooling
  • Exclusive Airwing provides unprecedented aerodynamic performance with 5 distinct positions

Click to view Sizing Chart

 

Arai Sizing Chart
3X Small 49-50cm Large 59-60cm
2X Small 51-52cm X Large 61-62cm
X Small 53-54cm 2X Large 63-64cm
Small 55-56cm 3X Large 65-66cm
Medium 57-58cm

Interior Comfort Lining Thickness
Helmet Size Lining Code 12mm Thickness 10mm Thickness 7mm Thickness 5mm Thickness
3XS* I Opt. Std. Opt. Opt.
2XS* I Opt. Opt. Std. Opt.
XS II (sm) Opt. Std. Opt. Opt.
SM II(sm) Opt. Opt. Std. Opt.
MD III(md) Opt. Std. Opt. Opt.
LG III(md) Opt. Opt. Std. Opt.
XL IV(lg) Opt. Opt. Std. Opt.
2XL IV(lg) Opt. Opt. Opt. Std.
3XL V Std.
Removable/replaceable comfort liners, along with check pads, that allow you to customize the fit of Arai helmets.*Not available for all models of helmets.

Interior Cheek Pad Thickness*
Helmet Cheek pads
Size Corsair V Series RX-Q Series Vector-2 Series Profile Series VX-Pro 3 XC/XC Ram XD/XD3
Optional 40mm — — — — — —
Optional 40mm — — 40mm 35mm — 35mm
3XS — — — — — — —
2XS — 35mm 35mm — — — —
XS Std 35mm 30mm 30mm 35mm 30mm 30mm 30mm
SM Std 30mm 30mm 30mm 30mm 25mm 30mm 25mm
Md Std 30mm 30mm 30mm 30mm 25mm 30mm 25mm
Lg Std 25mm 25mm 25mm 25mm 20mm 25mm 20mm
XL Std 25mm 25mm 25mm 25mm 20mm 25mm 20mm
2XL Std 20mm 25mm 25mm 20mm 15mm 25mm 15mm
3XL Std — 20mm 20mm — — — —
Optional 15mm — — 15mm 12mm — 12mm
Optional 12mm — — 12mm — — —
Shell I/O — — L/O — — —
*Current size applications for non Snell 2010. However, note that changes and updates can affect the standard pad-thickness supplied with your helmet.

 

 

]]> http://hellmutts.com/arai/corsair-v-haga-wsbk-rainbow/feed/ 0 Corsair V Doohan http://hellmutts.com/arai/corsair-v-doohan/ http://hellmutts.com/arai/corsair-v-doohan/#comments Fri, 25 Nov 2011 22:03:22 +0000 hellmutts_site http://hellmutts.com/?p=604 Arai Corsair V Doohan Graphics Helmet
  • Hyper-Ridge around the bottom enhances shell strength while providing a larger bottom opening
  • Larger bottom opening promotes ease of putting on and taking off the helmet
  • Peripheral belting across the forehead area of the shell enhances structural integrity while maintaining flexibility, low weight and shell size
  • Larger upper vent tabs make operating the vents easier even with thick winter gloves
  • Arai “I” shield with Super AdSis shield system
  • “I” shield is 5mm longer on each side and provides wider field of view
  • “I” shield and base plates exclusive to Corsair V
  • Latest generation of Dry Cool liner has a new silver-grey color
  • Rear mounting snaps are slightly re-positioned for exclusivity to the Corsair V
  • Neckroll is removable and has additional exhaust channels to remove interior heat
  • Cheek pads have the exclusive Emergency Release Tab feature
  • Side exhaust cowls exhaust heat as well as add lateral stability at speed
  • Enhanced air inlets of the new DF-9 diffuser increase airflow efficiency
  • Brow vents now duct air into the temple area and out the side vents for maximum cooling
  • Exclusive Airwing provides unprecedented aerodynamic performance with 5 distinct positions

Click to view Sizing Chart

 

Arai Sizing Chart
3X Small 49-50cm Large 59-60cm
2X Small 51-52cm X Large 61-62cm
X Small 53-54cm 2X Large 63-64cm
Small 55-56cm 3X Large 65-66cm
Medium 57-58cm

Interior Comfort Lining Thickness
Helmet Size Lining Code 12mm Thickness 10mm Thickness 7mm Thickness 5mm Thickness
3XS* I Opt. Std. Opt. Opt.
2XS* I Opt. Opt. Std. Opt.
XS II (sm) Opt. Std. Opt. Opt.
SM II(sm) Opt. Opt. Std. Opt.
MD III(md) Opt. Std. Opt. Opt.
LG III(md) Opt. Opt. Std. Opt.
XL IV(lg) Opt. Opt. Std. Opt.
2XL IV(lg) Opt. Opt. Opt. Std.
3XL V Std.
Removable/replaceable comfort liners, along with check pads, that allow you to customize the fit of Arai helmets.*Not available for all models of helmets.

Interior Cheek Pad Thickness*
Helmet Cheek pads
Size Corsair V Series RX-Q Series Vector-2 Series Profile Series VX-Pro 3 XC/XC Ram XD/XD3
Optional 40mm — — — — — —
Optional 40mm — — 40mm 35mm — 35mm
3XS — — — — — — —
2XS — 35mm 35mm — — — —
XS Std 35mm 30mm 30mm 35mm 30mm 30mm 30mm
SM Std 30mm 30mm 30mm 30mm 25mm 30mm 25mm
Md Std 30mm 30mm 30mm 30mm 25mm 30mm 25mm
Lg Std 25mm 25mm 25mm 25mm 20mm 25mm 20mm
XL Std 25mm 25mm 25mm 25mm 20mm 25mm 20mm
2XL Std 20mm 25mm 25mm 20mm 15mm 25mm 15mm
3XL Std — 20mm 20mm — — — —
Optional 15mm — — 15mm 12mm — 12mm
Optional 12mm — — 12mm — — —
Shell I/O — — L/O — — —
*Current size applications for non Snell 2010. However, note that changes and updates can affect the standard pad-thickness supplied with your helmet.

 

 

]]> http://hellmutts.com/arai/corsair-v-doohan/feed/ 0 Corsair V Russell http://hellmutts.com/arai/corsair-v-russell/ http://hellmutts.com/arai/corsair-v-russell/#comments Wed, 23 Nov 2011 20:18:35 +0000 hellmutts_site http://hellmutts.com/?p=575 Arai Corsair V Russell Graphics Helmet
  • Hyper-Ridge around the bottom enhances shell strength while providing a larger bottom opening
  • Larger bottom opening promotes ease of putting on and taking off the helmet
  • Peripheral belting across the forehead area of the shell enhances structural integrity while maintaining flexibility, low weight and shell size
  • Larger upper vent tabs make operating the vents easier even with thick winter gloves
  • Arai “I” shield with Super AdSis shield system
  • “I” shield is 5mm longer on each side and provides wider field of view
  • “I” shield and base plates exclusive to Corsair V
  • Latest generation of Dry Cool liner has a new silver-grey color
  • Rear mounting snaps are slightly re-positioned for exclusivity to the Corsair V
  • Neckroll is removable and has additional exhaust channels to remove interior heat
  • Cheek pads have the exclusive Emergency Release Tab feature
  • Side exhaust cowls exhaust heat as well as add lateral stability at speed
  • Enhanced air inlets of the new DF-9 diffuser increase airflow efficiency
  • Brow vents now duct air into the temple area and out the side vents for maximum cooling
  • Exclusive Airwing provides unprecedented aerodynamic performance with 5 distinct positions

Click to view Sizing Chart

 

Arai Sizing Chart
3X Small 49-50cm Large 59-60cm
2X Small 51-52cm X Large 61-62cm
X Small 53-54cm 2X Large 63-64cm
Small 55-56cm 3X Large 65-66cm
Medium 57-58cm

Interior Comfort Lining Thickness
Helmet Size Lining Code 12mm Thickness 10mm Thickness 7mm Thickness 5mm Thickness
3XS* I Opt. Std. Opt. Opt.
2XS* I Opt. Opt. Std. Opt.
XS II (sm) Opt. Std. Opt. Opt.
SM II(sm) Opt. Opt. Std. Opt.
MD III(md) Opt. Std. Opt. Opt.
LG III(md) Opt. Opt. Std. Opt.
XL IV(lg) Opt. Opt. Std. Opt.
2XL IV(lg) Opt. Opt. Opt. Std.
3XL V Std.
Removable/replaceable comfort liners, along with check pads, that allow you to customize the fit of Arai helmets.*Not available for all models of helmets.

Interior Cheek Pad Thickness*
Helmet Cheek pads
Size Corsair V Series RX-Q Series Vector-2 Series Profile Series VX-Pro 3 XC/XC Ram XD/XD3
Optional 40mm — — — — — —
Optional 40mm — — 40mm 35mm — 35mm
3XS — — — — — — —
2XS — 35mm 35mm — — — —
XS Std 35mm 30mm 30mm 35mm 30mm 30mm 30mm
SM Std 30mm 30mm 30mm 30mm 25mm 30mm 25mm
Md Std 30mm 30mm 30mm 30mm 25mm 30mm 25mm
Lg Std 25mm 25mm 25mm 25mm 20mm 25mm 20mm
XL Std 25mm 25mm 25mm 25mm 20mm 25mm 20mm
2XL Std 20mm 25mm 25mm 20mm 15mm 25mm 15mm
3XL Std — 20mm 20mm — — — —
Optional 15mm — — 15mm 12mm — 12mm
Optional 12mm — — 12mm — — —
Shell I/O — — L/O — — —
*Current size applications for non Snell 2010. However, note that changes and updates can affect the standard pad-thickness supplied with your helmet.

 

 

]]> http://hellmutts.com/arai/corsair-v-russell/feed/ 0 Corsair V Nicky-3 http://hellmutts.com/arai/corsair-v-nicky-3/ http://hellmutts.com/arai/corsair-v-nicky-3/#comments Wed, 23 Nov 2011 20:08:34 +0000 hellmutts_site http://hellmutts.com/?p=570 Arai Corsair V Nicky-3 Black / Red Graphics Helmet
  • Hyper-Ridge around the bottom enhances shell strength while providing a larger bottom opening
  • Larger bottom opening promotes ease of putting on and taking off the helmet
  • Peripheral belting across the forehead area of the shell enhances structural integrity while maintaining flexibility, low weight and shell size
  • Larger upper vent tabs make operating the vents easier even with thick winter gloves
  • Arai “I” shield with Super AdSis shield system
  • “I” shield is 5mm longer on each side and provides wider field of view
  • “I” shield and base plates exclusive to Corsair V
  • Latest generation of Dry Cool liner has a new silver-grey color
  • Rear mounting snaps are slightly re-positioned for exclusivity to the Corsair V
  • Neckroll is removable and has additional exhaust channels to remove interior heat
  • Cheek pads have the exclusive Emergency Release Tab feature
  • Side exhaust cowls exhaust heat as well as add lateral stability at speed
  • Enhanced air inlets of the new DF-9 diffuser increase airflow efficiency
  • Brow vents now duct air into the temple area and out the side vents for maximum cooling
  • Exclusive Airwing provides unprecedented aerodynamic performance with 5 distinct positions

Click to view Sizing Chart

 

Arai Sizing Chart
3X Small 49-50cm Large 59-60cm
2X Small 51-52cm X Large 61-62cm
X Small 53-54cm 2X Large 63-64cm
Small 55-56cm 3X Large 65-66cm
Medium 57-58cm

Interior Comfort Lining Thickness
Helmet Size Lining Code 12mm Thickness 10mm Thickness 7mm Thickness 5mm Thickness
3XS* I Opt. Std. Opt. Opt.
2XS* I Opt. Opt. Std. Opt.
XS II (sm) Opt. Std. Opt. Opt.
SM II(sm) Opt. Opt. Std. Opt.
MD III(md) Opt. Std. Opt. Opt.
LG III(md) Opt. Opt. Std. Opt.
XL IV(lg) Opt. Opt. Std. Opt.
2XL IV(lg) Opt. Opt. Opt. Std.
3XL V Std.
Removable/replaceable comfort liners, along with check pads, that allow you to customize the fit of Arai helmets.*Not available for all models of helmets.

Interior Cheek Pad Thickness*
Helmet Cheek pads
Size Corsair V Series RX-Q Series Vector-2 Series Profile Series VX-Pro 3 XC/XC Ram XD/XD3
Optional 40mm — — — — — —
Optional 40mm — — 40mm 35mm — 35mm
3XS — — — — — — —
2XS — 35mm 35mm — — — —
XS Std 35mm 30mm 30mm 35mm 30mm 30mm 30mm
SM Std 30mm 30mm 30mm 30mm 25mm 30mm 25mm
Md Std 30mm 30mm 30mm 30mm 25mm 30mm 25mm
Lg Std 25mm 25mm 25mm 25mm 20mm 25mm 20mm
XL Std 25mm 25mm 25mm 25mm 20mm 25mm 20mm
2XL Std 20mm 25mm 25mm 20mm 15mm 25mm 15mm
3XL Std — 20mm 20mm — — — —
Optional 15mm — — 15mm 12mm — 12mm
Optional 12mm — — 12mm — — —
Shell I/O — — L/O — — —
*Current size applications for non Snell 2010. However, note that changes and updates can affect the standard pad-thickness supplied with your helmet.

 

 

]]> http://hellmutts.com/arai/corsair-v-nicky-3/feed/ 0 Corsair V Aoyama 3 http://hellmutts.com/arai/corsair-v-aoyama-3/ http://hellmutts.com/arai/corsair-v-aoyama-3/#comments Mon, 21 Nov 2011 21:29:52 +0000 hellmutts_site http://hellmutts.com/?p=566 Arai Corsair V Aoyama 3 Graphics Helmet
  • Hyper-Ridge around the bottom enhances shell strength while providing a larger bottom opening
  • Larger bottom opening promotes ease of putting on and taking off the helmet
  • Peripheral belting across the forehead area of the shell enhances structural integrity while maintaining flexibility, low weight and shell size
  • Larger upper vent tabs make operating the vents easier even with thick winter gloves
  • Arai “I” shield with Super AdSis shield system
  • “I” shield is 5mm longer on each side and provides wider field of view
  • “I” shield and base plates exclusive to Corsair V
  • Latest generation of Dry Cool liner has a new silver-grey color
  • Rear mounting snaps are slightly re-positioned for exclusivity to the Corsair V
  • Neckroll is removable and has additional exhaust channels to remove interior heat
  • Cheek pads have the exclusive Emergency Release Tab feature
  • Side exhaust cowls exhaust heat as well as add lateral stability at speed
  • Enhanced air inlets of the new DF-9 diffuser increase airflow efficiency
  • Brow vents now duct air into the temple area and out the side vents for maximum cooling
  • Exclusive Airwing provides unprecedented aerodynamic performance with 5 distinct positions

Click to view Sizing Chart

Arai Sizing Chart
3X Small 49-50cm Large 59-60cm
2X Small 51-52cm X Large 61-62cm
X Small 53-54cm 2X Large 63-64cm
Small 55-56cm 3X Large 65-66cm
Medium 57-58cm

Interior Comfort Lining Thickness
Helmet Size Lining Code 12mm Thickness 10mm Thickness 7mm Thickness 5mm Thickness
3XS* I Opt. Std. Opt. Opt.
2XS* I Opt. Opt. Std. Opt.
XS II (sm) Opt. Std. Opt. Opt.
SM II(sm) Opt. Opt. Std. Opt.
MD III(md) Opt. Std. Opt. Opt.
LG III(md) Opt. Opt. Std. Opt.
XL IV(lg) Opt. Opt. Std. Opt.
2XL IV(lg) Opt. Opt. Opt. Std.
3XL V Std.
Removable/replaceable comfort liners, along with check pads, that allow you to customize the fit of Arai helmets.*Not available for all models of helmets.

Interior Cheek Pad Thickness*
Helmet Cheek pads
Size Corsair V Series RX-Q Series Vector-2 Series Profile Series VX-Pro 3 XC/XC Ram XD/XD3
Optional 40mm — — — — — —
Optional 40mm — — 40mm 35mm — 35mm
3XS — — — — — — —
2XS — 35mm 35mm — — — —
XS Std 35mm 30mm 30mm 35mm 30mm 30mm 30mm
SM Std 30mm 30mm 30mm 30mm 25mm 30mm 25mm
Md Std 30mm 30mm 30mm 30mm 25mm 30mm 25mm
Lg Std 25mm 25mm 25mm 25mm 20mm 25mm 20mm
XL Std 25mm 25mm 25mm 25mm 20mm 25mm 20mm
2XL Std 20mm 25mm 25mm 20mm 15mm 25mm 15mm
3XL Std — 20mm 20mm — — — —
Optional 15mm — — 15mm 12mm — 12mm
Optional 12mm — — 12mm — — —
Shell I/O — — L/O — — —
*Current size applications for non Snell 2010. However, note that changes and updates can affect the standard pad-thickness supplied with your helmet.

 

 

]]> http://hellmutts.com/arai/corsair-v-aoyama-3/feed/ 0 Corsair V Edwards Graphic http://hellmutts.com/arai/corsair-v-edwards-graphic/ http://hellmutts.com/arai/corsair-v-edwards-graphic/#comments Mon, 21 Nov 2011 21:21:58 +0000 hellmutts_site http://hellmutts.com/?p=558 Arai Corsair V Edwards Red , Blue, & Black Graphics Helmet
  • Hyper-Ridge around the bottom enhances shell strength while providing a larger bottom opening
  • Larger bottom opening promotes ease of putting on and taking off the helmet
  • Peripheral belting across the forehead area of the shell enhances structural integrity while maintaining flexibility, low weight and shell size
  • Larger upper vent tabs make operating the vents easier even with thick winter gloves
  • Arai “I” shield with Super AdSis shield system
  • “I” shield is 5mm longer on each side and provides wider field of view
  • “I” shield and base plates exclusive to Corsair V
  • Latest generation of Dry Cool liner has a new silver-grey color
  • Rear mounting snaps are slightly re-positioned for exclusivity to the Corsair V
  • Neckroll is removable and has additional exhaust channels to remove interior heat
  • Cheek pads have the exclusive Emergency Release Tab feature
  • Side exhaust cowls exhaust heat as well as add lateral stability at speed
  • Enhanced air inlets of the new DF-9 diffuser increase airflow efficiency
  • Brow vents now duct air into the temple area and out the side vents for maximum cooling
  • Exclusive Airwing provides unprecedented aerodynamic performance with 5 distinct positions

Click to view Sizing Chart

 

Arai Sizing Chart
3X Small 49-50cm Large 59-60cm
2X Small 51-52cm X Large 61-62cm
X Small 53-54cm 2X Large 63-64cm
Small 55-56cm 3X Large 65-66cm
Medium 57-58cm

Interior Comfort Lining Thickness
Helmet Size Lining Code 12mm Thickness 10mm Thickness 7mm Thickness 5mm Thickness
3XS* I Opt. Std. Opt. Opt.
2XS* I Opt. Opt. Std. Opt.
XS II (sm) Opt. Std. Opt. Opt.
SM II(sm) Opt. Opt. Std. Opt.
MD III(md) Opt. Std. Opt. Opt.
LG III(md) Opt. Opt. Std. Opt.
XL IV(lg) Opt. Opt. Std. Opt.
2XL IV(lg) Opt. Opt. Opt. Std.
3XL V Std.
Removable/replaceable comfort liners, along with check pads, that allow you to customize the fit of Arai helmets.*Not available for all models of helmets.

Interior Cheek Pad Thickness*
Helmet Cheek pads
Size Corsair V Series RX-Q Series Vector-2 Series Profile Series VX-Pro 3 XC/XC Ram XD/XD3
Optional 40mm — — — — — —
Optional 40mm — — 40mm 35mm — 35mm
3XS — — — — — — —
2XS — 35mm 35mm — — — —
XS Std 35mm 30mm 30mm 35mm 30mm 30mm 30mm
SM Std 30mm 30mm 30mm 30mm 25mm 30mm 25mm
Md Std 30mm 30mm 30mm 30mm 25mm 30mm 25mm
Lg Std 25mm 25mm 25mm 25mm 20mm 25mm 20mm
XL Std 25mm 25mm 25mm 25mm 20mm 25mm 20mm
2XL Std 20mm 25mm 25mm 20mm 15mm 25mm 15mm
3XL Std — 20mm 20mm — — — —
Optional 15mm — — 15mm 12mm — 12mm
Optional 12mm — — 12mm — — —
Shell I/O — — L/O — — —
*Current size applications for non Snell 2010. However, note that changes and updates can affect the standard pad-thickness supplied with your helmet.

 

 

]]> http://hellmutts.com/arai/corsair-v-edwards-graphic/feed/ 0 Corsair V Edwards Replica http://hellmutts.com/arai/corsair-v-edwards-replica/ http://hellmutts.com/arai/corsair-v-edwards-replica/#comments Mon, 21 Nov 2011 19:33:00 +0000 hellmutts_site http://hellmutts.com/?p=552 Arai Corsair V Edwards Replica Graphics Helmet
  • Hyper-Ridge around the bottom enhances shell strength while providing a larger bottom opening
  • Larger bottom opening promotes ease of putting on and taking off the helmet
  • Peripheral belting across the forehead area of the shell enhances structural integrity while maintaining flexibility, low weight and shell size
  • Larger upper vent tabs make operating the vents easier even with thick winter gloves
  • Arai “I” shield with Super AdSis shield system
  • “I” shield is 5mm longer on each side and provides wider field of view
  • “I” shield and base plates exclusive to Corsair V
  • Latest generation of Dry Cool liner has a new silver-grey color
  • Rear mounting snaps are slightly re-positioned for exclusivity to the Corsair V
  • Neckroll is removable and has additional exhaust channels to remove interior heat
  • Cheek pads have the exclusive Emergency Release Tab feature
  • Side exhaust cowls exhaust heat as well as add lateral stability at speed
  • Enhanced air inlets of the new DF-9 diffuser increase airflow efficiency
  • Brow vents now duct air into the temple area and out the side vents for maximum cooling
  • Exclusive Airwing provides unprecedented aerodynamic performance with 5 distinct positions

Click to view Sizing Chart

Arai Sizing Chart
3X Small 49-50cm Large 59-60cm
2X Small 51-52cm X Large 61-62cm
X Small 53-54cm 2X Large 63-64cm
Small 55-56cm 3X Large 65-66cm
Medium 57-58cm

Interior Comfort Lining Thickness
Helmet Size Lining Code 12mm Thickness 10mm Thickness 7mm Thickness 5mm Thickness
3XS* I Opt. Std. Opt. Opt.
2XS* I Opt. Opt. Std. Opt.
XS II (sm) Opt. Std. Opt. Opt.
SM II(sm) Opt. Opt. Std. Opt.
MD III(md) Opt. Std. Opt. Opt.
LG III(md) Opt. Opt. Std. Opt.
XL IV(lg) Opt. Opt. Std. Opt.
2XL IV(lg) Opt. Opt. Opt. Std.
3XL V Std.
Removable/replaceable comfort liners, along with check pads, that allow you to customize the fit of Arai helmets.*Not available for all models of helmets.

Interior Cheek Pad Thickness*
Helmet Cheek pads
Size Corsair V Series RX-Q Series Vector-2 Series Profile Series VX-Pro 3 XC/XC Ram XD/XD3
Optional 40mm — — — — — —
Optional 40mm — — 40mm 35mm — 35mm
3XS — — — — — — —
2XS — 35mm 35mm — — — —
XS Std 35mm 30mm 30mm 35mm 30mm 30mm 30mm
SM Std 30mm 30mm 30mm 30mm 25mm 30mm 25mm
Md Std 30mm 30mm 30mm 30mm 25mm 30mm 25mm
Lg Std 25mm 25mm 25mm 25mm 20mm 25mm 20mm
XL Std 25mm 25mm 25mm 25mm 20mm 25mm 20mm
2XL Std 20mm 25mm 25mm 20mm 15mm 25mm 15mm
3XL Std — 20mm 20mm — — — —
Optional 15mm — — 15mm 12mm — 12mm
Optional 12mm — — 12mm — — —
Shell I/O — — L/O — — —
*Current size applications for non Snell 2010. However, note that changes and updates can affect the standard pad-thickness supplied with your helmet.

 

]]> http://hellmutts.com/arai/corsair-v-edwards-replica/feed/ 0